Agitation |
Drive |
DC motor, AC Gear motor, Top drive(mechanical seal driving) |
Range |
50~1000rpm ±1rpm |
Impellers |
Turbine impeller(SUS316L) Foam breaker (SUS316L) |
Sensor |
Magnetic Hall sensor |
Control |
Microprocessor based PID |
Materials&
Finish |
Vessel |
Using 316L stainless steel it is polished mechanically or electrically |
Piping |
316L stainless steel prevent contamination and is polished by electrically |
O-rings/Gaskets |
Viton or silicon material is used for the O-ring and the EPDM is used for gasket |
Sterilization |
Built-in heater makers the in-situ sterilization for the vessel, head plate, filter, aeration pipe lines in 105℃~130℃ temperature range automatically |
Temperature |
Range(℃) |
From 3oC above the cooling water temperature to 80oC (accuracy ±0.1 ℃) |
Sensor |
RTD(Pt-100) |
Control |
The built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket |
Aeration |
Sparger |
Ring sparger (SUS 316L) |
Intel Filter |
The cartridge type sterilizable pleated type 0.2um absolute filter specifications(option item) |
Outer Filter |
The same as internal filter specification(option item) |
Control Range |
Different vessel size and/or ordered specifications |
Pressure Control |
The back pressure is controlled manually or automatically |
Control Unit |
Panel |
8.5"Graphic Color LCD, Membrane keypad |
Communications |
Memory stick, printer, computer with the RS-232C communications protocol |
Controller Board |
MC68EC020 microprocessor based integrated controller board is adopted to measure, control and display the fermentation system |
Power Supply |
220V 50/60Hz, Single phase |
Data Storage |
pH, DO, Pressure, Temperature and Agitation speed |